Hobby Shop EZB by Larry Coslick Illustrated by Steve Gardner Published in Indoor News and Views This building and trim article is

Hobby Shop EZB

by Larry Coslick
Illustrated by Steve Gardner
Published in Indoor News and Views

This building and trim article is intended to help the new modeler eliminate some of the frustrations when starting out in this fascinating hobby. It is a detailed description of my methods for constructing an EZB. The prototype was built entirely from hobby shop wood, and was quite strong at .61 gram. Following these directions this EZB should come out weighing less than .75 grams using only wood available at your local hobby shop. At this weight the model could fly from 22 to 25 minutes in a high ceiling Site. For a new EZB flyer this is a very good performance.

Click to view the plans
(Will open in a new browser window)

Click to view the outlines
(Will open in a new browser window)

Next Section

If you found this page through a search engine, don't miss the complete Indoor Duration site
Click Here for the full www.IndoorDuration.com site